AeroCool follows the philosophy that “less is more” in its VS-9, using less metal to provide more ventilation.
Most of the top and base are open to airflow, along with 1/3 of the left side panel and all nine 5.25” bay covers. Though the VS-9 could support up to eight fans, the rear panel holds its only included fan. Rubber grommets under it protect the hoses of external water cooling systems, while folding side panel handles found even farther down can be left unfolded to ease access to rear-panel ports. The VS-9 top panel can hold fans of multiple sizes, thanks to its continuous series of holes. The upper limit is two 140 mm fans, though the heat pipes and DIMM latch locations of some motherboards will prevent such large coolers from fitting. The “front panel” port section is located along the VS-9’s left-side edge, and its ports are oriented for the top of a USB flash drive to face right. Open-cell foam behind the drive bay covers prevents a see-through effect, while still allowing good system ventilation.
Most of the top and base are open to airflow, along with 1/3 of the left side panel and all nine 5.25” bay covers. Though the VS-9 could support up to eight fans, the rear panel holds its only included fan. Rubber grommets under it protect the hoses of external water cooling systems, while folding side panel handles found even farther down can be left unfolded to ease access to rear-panel ports. The VS-9 top panel can hold fans of multiple sizes, thanks to its continuous series of holes. The upper limit is two 140 mm fans, though the heat pipes and DIMM latch locations of some motherboards will prevent such large coolers from fitting. The “front panel” port section is located along the VS-9’s left-side edge, and its ports are oriented for the top of a USB flash drive to face right. Open-cell foam behind the drive bay covers prevents a see-through effect, while still allowing good system ventilation.
AeroCool Vs-9 Specifications
| Case Type | Middle Tower |
| Material | SECC 0.6mm |
| Motherboards | ATX/ Micro-ATX |
| Chassis Dimensions | 430(H) X 190(W) X 493(D) |
| Drive Bays | 9 x 5.25" (External) /1 x 3.5" (External-w/ adaptor) / 5 x 3.5" HDD (Hidden) 1 x 2.5" HDD (Hidden) |
| Expansion Slots | 7 slots |
| Max Length space available for PCI slots | 295mm |
| I/O Ports | 2 x USB2.0 / Mic & headphone (AC97 & HD audio) |
- High performance "Mid-Tower" for gamers and enthusiast.
- Solidly constructed "ALL BLACK" chassis – 0.6mm SECC Japanese Steel and beautifully finished ALL BLACK interior.
- High-end Graphic card Support – Supports longer high-end VGA cards up to 295 mm.
- High Expandability – Supports 9 x 5 1/4" bays and maximum 5 x 3.5" HDDs (internal) with HDD convertor brackets.
- Superb HDD Cooling capability – Each HDD bracket has pre-drilled fan holes to mount a 12cm fan to cool each HDD individually.
- Ease of Installation – New "Easy-install" screw-less kits are included for the 5 1/4" devices and PCI slot.
- Easy Access Front I/O ports – 2 x USBs and Audio/Mic ports are easily accessible from the front panel.
- Smart Cable Management – Cable routing clips are pre-mounted on the MB so users can arrange the cables inside the chassis neatly.
- CPU holes is pre-drilled on the MB plate for ease of CPU cooler assembly Superb Cooling – Users can install up to 7 fans - 3 x 12cm front intake fans (optional), 2 x 12cm/14cm intake side panel fans (optional), 1 x 12cm back exhaust fan (included) and 1 x 12cm intake bottom fan (optional).
- Un-rival Airflow – The front "Mesh" front bay cover design allows max intake of cold air. The top chassis vent holes enable the hot air inside the chassis to exist easily. Users also have the option to install up to 2 x 12cm/14cm on the top panel if there is sufficient space inside the chassis.
- TAC 2.0 compatible Side Panel
- Bottom PSU position – the bottom PSU location enables PSUs to suck in cold air and provides better air flow for your system.
- Water-cooling Support – water-cooling holes are pre-drilled to support water-cooling systems!!
No comments:
Post a Comment